Equipment Parameter
Founded in 2003, Langsda Metal Products Co.,Ltd platform owns 34 equiments come from Italy, Korea and Germany.Could cut hot rolled and cold rolled coil and sheets.
| Processing Range | Parameter | Remark |
| Widgh | 12-2150mm | Equipment characterristic: Could process rough huge coil Cold rolled:30T Hot rolled:40T Thickness over 14mm,maximum TS 700MPa |
| Thickness | 0.1-14.0mm | |
| Article points accuracy | ±0.5mm | |
| Equipment Quantity | 16 sets |
Horizontal cutting Equipment:23 sets
Equipment parameter
Founded in 2003, Langsda Metal Products Co.,Ltd cutting platform owns 34 equiments come from Italy, Korea and Germany.Could cut narrow-band to super-wide plates.
| Processing Range | Parameter | Remark |
| Widgh | 100-2150mm | Machine features: Could process rough huge coil Cold rolled:30T Hot rolled:40T |
| Length | 300-150000mm | |
| Thickness | 0.2-25.4mm | |
| Equipment Quantity | 23 sets |
Equipment introduction
There are 23 sets horizontal cutting equipment,imported from Korea,Italy and Germany. Maximum coil 40 Tons, with coat paper and film fuction. In China, it's the only one equipment that could cut thick plate oblique fuction. It could eliminate 65% plate shape defect.
Coil cutting platform
Owns Italy VIGANO cutting equipment,with flattening fuction, could eliminate steel innerstress, provide high quality opened plate and four-side cutting plate. Plate surface smooth, level up, without wave, could reach factory plate level, don't change shape when laser cutting.
Cross shear technological parameter
| Width | Thickness | Length | Tensigh strength |
| 100-2150mm | 2-20mm | 300-15000mm | When thickness 10mm Max T.S. is 1200MPa |
